![]() ![]() Once the counter is reset, you should be able to print again. The ink absorber inside of the G series printers is not designed to be removed. In the case of clogged nozzles, the printer's cleaning routines can use the ink feed system to flush the nozzles and clear the clogs. Roughly all of them are pretty easy to follow, albeit contrived and not in effect discoverable on your own. Instead, Canon inkjet printers use the Canon inks themselves to keep the nozzles clear and clean. Searching for your printer model and either "ink absorber" or "used ink tank" should supply you with a few links to check out. Habitancy have been able to frame out how to do it, however, and there are instructions online for many printers. Unfortunately, the instructions for resetting the counter differ from printer to printer and again, as far as I can tell, are not mentioned in the manual. Universal Chip Resetter for Canon CLI-221 and PGI-220 Inkjet Ink Cartridges. Unplug the printer so that the cartridges will remain in their position. Until the counter reaches a inescapable unknown point, that is, in which case you'll have to repeat the procedure. Open the printer as though you were going to install new ink cartridges, letting the cartridge cradle move to the center of the printing unit. However, if you haven't printed that much or you have and you just need to print something right this minute, there is a way to reset the counter and stop the error from showing up again. If you've done a lot of printing, the ink absorber may in effect be full and you might need to have it cleaned or replaced to ensure the best printing quality. You can get in touch with Canon at: 1-80 Alternatively, the waste ink absorber is to the right of the print carriage, so you can try to clean it yourself if you don't want to go through that. Many ink jet printers have them, but as far as I know, only Canon Pixma printers display an error when a inescapable internal counter suggests that the ink absorber may be full. Hi, You will need to contact Canon directly as these are not sold just anywhere. This prevents smudges, so it's a good thing to have. Firstly, it might be leading to note that the waste ink absorber is a little pad that sits under the cartridge's "home" position and collects any loose ink that may be on the cartridge.
0 Comments
Leave a Reply. |